UN 2226: Benzotrichloride
DOT Classification and Shipping
UN 2226 is assigned the proper shipping name Benzotrichloride in the U.S. DOT Hazardous Materials Table (49 CFR 172.101). It is classified as a Class 8 Corrosive material, Packing Group II. Required label(s): 8.
Packing group indicates the degree of danger within a hazard class: PG I is high danger, PG II medium, PG III low. The proper shipping name, hazard class, UN number, and packing group together form the basic shipping description that must appear on shipping papers and, where required, on the package and placard.
Emergency Response (ERG Guide 156)
Hazards: TOXIC or CORROSIVE. FLAMMABLE. Vapors may travel to ignition source.
Fire: Alcohol-resistant foam, dry chemical, CO2. Water spray for cooling only.
Spill: Eliminate ignition sources. Do not touch. Ventilate area.
Chemical and Physical Properties
Benzotrichloride appears as a clear colorless to yellowish colored liquid with a penetrating odor. Denser than water and vapors are heavier than air. May be toxic by inhalation or ingestion. Burns skin, eyes, and mucous membranes. Insoluble in water. Used to make dyes and other chemicals.
Regulatory Data
A release of this material at or above its CERCLA reportable quantity (10 lb) requires immediate notification to the National Response Center at 800-424-8802.
Special Provisions
49 CFR 172.102 special provision codes for this entry: B2, IB2, T7, TP2. These codes modify the general requirements (packaging, quantity limits, exceptions) for this specific material. Look up each code in 49 CFR 172.102 for the full text.
Need the full interactive record? Open UN 2226 in the SpillNerd lookup tool for the live database entry with placard graphics, GHS pictograms, full segregation tables, and synonym search. For another material, use the UN number and chemical lookup.
Reference data compiled from the DOT Hazardous Materials Table (49 CFR 172.101), the 2024 Emergency Response Guidebook, and public chemical databases (PubChem, NIOSH, EPA). Always verify the correct shipping description against the current regulation and the manufacturer's SDS Section 14 before shipping.