UN 130: Lead styphnate, wetted
DOT Classification and Shipping
UN 130 is assigned the proper shipping name Lead styphnate, wetted in the U.S. DOT Hazardous Materials Table (49 CFR 172.101). It is classified as a Class 1.1A Explosive material. Required label(s): 1.1.
Packing group indicates the degree of danger within a hazard class: PG I is high danger, PG II medium, PG III low. The proper shipping name, hazard class, UN number, and packing group together form the basic shipping description that must appear on shipping papers and, where required, on the package and placard.
Emergency Response (ERG Guide 112)
Hazards: May explode or be projected if heated. Fragments may travel great distances. Fire may produce irritating or toxic gases.
Fire: DO NOT fight fire when it reaches cargo. Evacuate area and let burn. Fight fire from maximum distance.
Spill: Do not touch or walk through spilled material. Isolate spill area immediately.
Chemical and Physical Properties
Lead styphnate, [wetted with >= 20 % water or mixture of alcohol and water] appears as a slurry or wet mass of orange-yellow crystals. Must be shipped wet with at least 20% water or water and denatured ethyl alcohol mixture. May explode due to shock, heat, flame, or friction if dried. Used as an initiating explosive. The primary hazard is the blast of an instantaneous explosion and not flying projectiles and fragments.
Special Provisions
49 CFR 172.102 special provision codes for this entry: 111, 117. These codes modify the general requirements (packaging, quantity limits, exceptions) for this specific material. Look up each code in 49 CFR 172.102 for the full text.
Need the full interactive record? Open UN 130 in the SpillNerd lookup tool for the live database entry with placard graphics, GHS pictograms, full segregation tables, and synonym search. For another material, use the UN number and chemical lookup.
Reference data compiled from the DOT Hazardous Materials Table (49 CFR 172.101), the 2024 Emergency Response Guidebook, and public chemical databases (PubChem, NIOSH, EPA). Always verify the correct shipping description against the current regulation and the manufacturer's SDS Section 14 before shipping.