UN 1212: Isobutanol
DOT Classification and Shipping
UN 1212 is assigned the proper shipping name Isobutanol in the U.S. DOT Hazardous Materials Table (49 CFR 172.101). It is classified as a Class 3 Flammable Liquid material, Packing Group III. Required label(s): 3.
Packing group indicates the degree of danger within a hazard class: PG I is high danger, PG II medium, PG III low. The proper shipping name, hazard class, UN number, and packing group together form the basic shipping description that must appear on shipping papers and, where required, on the package and placard.
Emergency Response (ERG Guide 129)
Hazards: Flammable. Irritating vapor. May cause dizziness. Toxic if inhaled or absorbed through skin.
Fire: Alcohol-resistant foam, dry chemical, CO2, water spray.
Spill: Eliminate ignition sources. Ventilate area. Absorb with earth or sand.
Chemical and Physical Properties
Isobutanol appears as a clear colorless liquid with a sweet odor. Flash point 85 - 100 °F. Less dense than water. Vapors heavier than air.
Regulatory Data
A release of this material at or above its CERCLA reportable quantity (5000 lb) requires immediate notification to the National Response Center at 800-424-8802.
Special Provisions
49 CFR 172.102 special provision codes for this entry: B1, IB3, T2, TP1. These codes modify the general requirements (packaging, quantity limits, exceptions) for this specific material. Look up each code in 49 CFR 172.102 for the full text.
Need the full interactive record? Open UN 1212 in the SpillNerd lookup tool for the live database entry with placard graphics, GHS pictograms, full segregation tables, and synonym search. For another material, use the UN number and chemical lookup.
Reference data compiled from the DOT Hazardous Materials Table (49 CFR 172.101), the 2024 Emergency Response Guidebook, and public chemical databases (PubChem, NIOSH, EPA). Always verify the correct shipping description against the current regulation and the manufacturer's SDS Section 14 before shipping.